Our Mavin 6.5" Dual Woofer Kit, Complete with Plans for a Slot Loaded Tower Design
Qty. Available 67
Excellent Sound, Great Quality, Super Response
The Mavin D-65 Kit
Dual Woofer 6.5" Two Way Design
with Basic Tower Cabinet Plans
4 ohms, 250 Watts RMS, Frequency Response 32 Hz. to 21 kHz.
I recently bought a deal of some nice 6.5" woofers and wanted to see what type of designs that I could come up with.
This one is the D65, a Dual 6.5" Woofer Design matched to a nice Cerwin Vega Silk Dome Tweeter.
Rated at 4 ohms, this design surprised me on the sound quality and overall respnse.
The woofers are wired in parallel increasing our wattage rating to 250 watts RMS. The Cabinet I designed is a Slot Ported Tower and it Sounds 10 times better than the $100.00 price tag would suggest.
Using 3/4" plywood the tower is 41" tall, 8.5" wide, and 12.5" deep, making for a very sleek looking cabinet. For complete detail check out the plans to the right.
For components I went with tried and true product. Our Mavin 2 way 12 dB 4 ohm crossovers and one of the nicest Cerwin Vega tweeters I have seen. I then married the crossover and tweeter with the cabinets and woofers, end result is an amazing set of speakers. Speakers I would match them up to any out there. As long as you build to the drawing, you will not be disapointed.
What you get;
Two each of the Mavin CR28 4 ohm 12 dB 300 watt 2 way crossovers
Two each Cerwin Vega LSE-GF2060 Silk Dome Tweeters
Four each of the Mavin 6.5" Stiff Cone Woofers
One PDF or JPG eMailed set of Cabinet Plans.
( Or just download for the link to the right. )
- Woofer Specifications
- 1" voice coil
- Power handling 125 watts RMS
- Rubber Surround
- Extra Thick Paper Cone
- Magnetically Shielded
- 6 ohms ( great for 4 or 8 ohm applications )
- Depth = 3.125" ( 3 1/8" ) (78 mm )
- Frame Dia. = 6.5" ( 6 1/2" ) ( 165 mm )
- Mounting Hole Opening Size 5.85" ( 5 9/16" ) ( 142 mm )
- Weight = 3 pounds ( raw weight of the speaker, not packaged )
- 30 oz. magnet structure
- 4 mounting screws, spaced 6.190" a part on the diagonal center to center ( 6 3/16" ) ( 157 mm )
The four mounting screw holes are 90 degrees to each other and spaced 4.435" a part on center. ( 4 7/16" ) ( 112 mm )
Woofer T/S Specs
- f(s) = 37.68 Hz.
- Q(ms) = 6.781
- V(as) = 23.68 liters ( 0.836 cf. )
- n(0) = 0.28%
- M(ms) = 35.20 grams
- R(e) = 3.09 ohms
- Q(es) = 0.436
- SPL = 91 dB @ 1W/1m
- C(ms) = 0.51 mm/N
- Z(max) = 51.19 ohms
- Q(ts) = 0.409
- L(e) = 0.53 mH
- BL = 7.69