Super 6.5" Woofer / Mid Range Speaker 150 watts RMS 8 ohms 6 1/2" 48 oz. Magnet MW7010 Style Replacement Generic to a Polk type of design.
Qty. Available 31
Mavin's 6.5" Woofer or Mid Range Driver, Polk Replacement, Also JBL, Cerwin Vega and Boston Acoustics Verified So Far.
8 ohms, 150 Watts RMS
Drop in Polk Replacement, Similar to MW7010
Note; That depending on which Polk Driver you have, the mounting hole could be very slightly undersized, about 1/16" of an inch. What that means is that you would need to enlarge the hole by that 1/16 of an inch, a simple sanding drum on an electric drill does the trick and takes about 10 mintes for a pair of speakers.
Also due the the massive weight of these woofers, we urge you to replace the standard wood screws with machine screws and tee nuts. This will keep your speakers from pulling loose due to the extra weight of the massive magnets. We have screw kits available for a small cost on the site.
Mavin makes a very nice 6 1/2 inch woofer, 150 watts RMS and at 8 ohms,
Design into your Car or Home Use.
With a rubber surround, and stiff plastic coated paper cone, it is made to perform and last.
This speaker was designed as a replacement for the Polk MW7010 series of 6.5" Woofer. The MW 7010's are far and few between these days. Our Mavin A166-1SSM6 was designed to out perform the standard Polk 6.5" diver, yet mirror closely the tonal qualtity of that style of speaker. It is a drop in replacement for most of the 6.5" ROUND Polk Drivers. This driver has the foam / rubber gasket on the face of the speaker.
Note: Some Polk designs have flatted edges. This speaker will not drop into those openings which have the flatted edges. This speaker is completely round, no edge flats.
- 1.25" voice coil
- Power handling 150 watts RMS
- Rubber Surround
- Thick Plastic Coated Paper Cone
- 8 ohms
- Depth = 3.875" ( 3 7/8" ) (97 mm )
- Frame Dia. = 6.7" ( 6 1/2" ) ( 170 mm )
- Mounting Hole Opening Size 5.875" ( 5 7/8" ) ( 150 mm )
- Weight = 5.5 pounds ( raw weight of the speaker, not packaged )
- 48 oz. magnet structure
- 4 mounting screws, spaced 6.250" a part on the diagonal center to center ( 6 1/4" ) ( 159 mm )
The four mounting screw holes are 90 degrees to each other and spaced 4.435" a part on center. ( 4 15/32" ) ( 113 mm )
- f(s) = 53Hz.
- Q(ms) =2.831
- V(as) = 22.13 liters ( 0.781 cf. )
- n(0) = 0.41%
- M(ms) = 13.37 grams
- R(e) = 6.97 ohms
- Q(es) = 0.767
- SPL = 92 dB @ 1W/1m
- C(ms) = 0.67 mm/N
- Z(max) = 32.68 ohms
- Q(ts) = 0.604
- L(e) = 0.407 mH
- BL = 6.37
- Sold as singles, 1 speaker
Click a photo to
E N L A R G E