Quality 10" Driver 250 Watts RMS 4 Ohms 92dB
Qty. Available 72
Quality 10" Driver 250 Watts RMS 8 Ohms 92dB
Our High Quality Mavin 10" Professional Drivers
Rated for 250 Watts RMS, with an impedance of 4 ohms, cloth surround for long life and durability.
Heavy 7 pound magnet structure, neat red speckle seal around the front of the frame to set it a part from the run of the mill product.
Nice Stiff Paper Cone for a Low Distortion High Fidelity Sound
Mavin's TL2501A series is a top of the line Professional Speaker Series, with a mix of high durability and great sound reproduction. You get a speaker that sounds great and that will last for years, what more can you ask for?
This is a very heavy and efficient speaker, with a 2" voice coil it can handle up to 250 watts RMS and 500 watts peak. Pumping out the sound is just what this speaker was designed for with a SPL rating of 92 dB and a practical range from 30 Hz. to 4000 Hz. you will find that the EM-TL2501A-4 is a great speaker to replace that blown driver, or for any new project you have in the wings.
Great for PA Systemes, Guitar Amps, Pro Speakers, or Really Durable Old School Home Systems.
- Stiff Pressed Paper Cone with Cloth Surround
- 250 Watts RMS Power Rating
- 4 ohm impedance
- A Practical Frequency Range from 30 Hz. to 4000 Hz.
- 2 inch ( 50 mm ) Voice Coil
- Size 10 3/16" Dia. for a 9 3/16" mounting hole, and a 4 3/8" mounting depth. 8 mounting screw holes
- Note that you can also get this speaker in an 4 Ohm Impedance
Thiele Small Specifications
- Revc = 3.200 ohms
- Fo = 43 Hz.
- Sd = 35.633 mM
- Md = 50.000 g
- Bl = 12.436T
- Qms = 3.626
- Qes = 0.719
- Qts = 0.600
- No = 0.520%
- SPL = 92 dB
- Vas = 40.701 mM
- Cms = 225.741u M/N
- Krm = 2.812 m Ohm
- Erm = 0.919
- Mms = 53.868 g
- Mmd = 50.000 g
- Kxm =24.568mH
- Exm = 0.769
(Click on a Picture to Enlarge for Better Detail)