|
Select from one of the following John Guest Product Ranges
 Plumbing Fittings - UK Sizes
JG Speedfit is a push-fit system suitable for the plumbing of hot and cold water services and central heating applications, including pressurised and combi systems. Speedfit fittings have been designed for use with both Speedfit and copper pipe.
Plumbing Pipe and Accessories - UK Sizes
We provide BPEX Barrier Pipe in coils or in bundles of straight lengths. As coils our BPEX pipe is available in 10,15 and 22mm diameter. In bundles we can provide the same pipe in either 15mm, 22mm or 28mm diameter. Polybutylene Barrier Pipe is available in coils in either 15 or 22mm diameter.
Plumbing Fittings - Irish Sizes
JG Speedfit is a push-fit system suitable for the plumbing of hot and cold water services and central heating applications, including pressurised and combi systems. Speedfit fittings have been designed for use with both Speedfit and copper pipe.
Plumbing Pipe and Accessories - Irish Sizes
We provide PEX Pipe in coils or in bundles of straight lengths. As coils our PEX Pipe is available in 1/2" and 3/4" diameter. In bundles we can provide the same pipe in either 1/2", 3/4" or 1" diameter.
Plumbing Fittings - US Sizes
JG Speedfit is a push-fit system suitable for the plumbing of hot and cold water services and central heating applications, including pressurised and combi systems. Speedfit fittings have been designed for use with both Speedfit and copper pipe.
Plumbing Pipe and Accessories - US Sizes
We provide PEX Pipe in coils or in bundles of straight lengths. As coils our PEX Pipe is available in 1/2" and 3/4" diameter. In bundles we can provide the same pipe in either 1/2", 3/4" or 1" diameter.
Polypropylene Fittings & Valves
Our polypropylene fittings and valves have been developed to satisfy the compatibility needs for a wide range of applications, especially potable liquids.
SuperSeal Fittings
Provide extra grip on hard steel, stainless steel and other polished metal tubing. A hand operated nut and wedge shaped plastic washer apply extra pressure to the connection.
PI/PM Plastic Fittings, Valves & accessories
Suitable for a wide range of applications involving foodstuffs, potable liquids, inert gases, CO2 lines, pneumatics, vacuum and Air Ring Mains.
CI/CM Plastic Fittings
Developed for the Water industry and suitable for potable liquid and intermittent hot water applications.
LLDPE Tube
Our LLDPE Tube provides for a wide range of temperatures and pressures. It provides for broad chemical compatibility and is made from non-contaminating materials.
LM Miniature Fittings
We offer a range of specially designed 4mm fittings for miniature pneumatics applications. The range is both compact and robust. Ends with M3 and M5 threads are designed to only need finger tightening.
Banjo Flow Controls
Our Banjo Flow Controls are designed for installation directly into cylinder ports to give precise control. They regulate the speed of pneumatic cylinders and other actuators.
Compressed Air Fittings
The John Guest range of push-in fittings and pipe are ideal for compressed air applications as they can be installed quickly and easily, considerably reducing the need for specialist staff and providing for much reduced production down time. There is no
Underground Fittings
Speedfit Underground fittings are designed to connect MDPE pipes used above and below ground to convey potable water from distribution mains to individual properties.
Automotive Fittings & Cartridges
John Guest has been firmly established as a supplier of connectors for the Automotive OEM market since 1983. Our products are typically used in fuel, brake vacuum, air suspension and low-pressure power steering systems.
Pneumatics Fittings
For the pneumatics industry we offer a fast and secure way of connecting tubes that provide considerable advantages over conventional fittings. Complex tubing systems can be assembled more rapidly than with traditional methods and, because Super Speedfit fittings are easy to disconnect, fault finding and maintenance become much easier operations. Within this range we have included our unique SuperThread fittings.
Fibre Optic Fittings
John Guest push-fit fittings have been specially designed for the telecommunications market, for use in local loop, network and customer box applications. The push-fit range is available to cover both blown fibre and cable pressurisation systems.
Plastic Cartridges
John Guest cartridges provide a quick, efficient and easy way of securing a Speedfit push-in connection into a wide variety of original equipment. As our cartridges require low insertion loads they are suitable for many different housing materials.
Metal Cartridges
John Guest cartridges with metal bodies are designed to provide a simple, cost effective way of securing tubes into taps, manifolds, flow direction splitters and many other types of components, which can be produced in a wide variety of metals.
Rigid Nylon Pipe
Our Rigid Nylon Pipe is offered in 3 metre lengths and is capable of withstanding temperatures and pressures well in excess of normal working conditions.
EasyClean
The JG EasyClean fitting provides a quick reusable gap free tube connection.
MI Brass Fittings
These brass fittings have been designed for use in Coffee Brewing Equipment, Beverage Dispensing, and Vending Machine Applications.
Underfloor Heating
Our Underfloor Heating System components are designed and manufactured in accordance with UK and European standards including ISO 9001 and DIN 4726
|
