Polk Audio 10" Woofer - Top Quality and Performance PKSW10.
Sold as single units, if you need a pair, you buy two.
The Polk PKSW10 is a fine 10" high performance woofer
It features a stiff thick treated paper cone with foam surround. With a Power handling ability of 200 watts RMS, plus output performance level of 91 db at 1w/1m SPL, and a frequency range from 30 Hz. to 8 kHz. you have a very nice performing woofer.
At 4 ohms these units can be used as a single driver, or can be combined in series for an 8 ohm load, or put in parallel for a 2 ohm load.
Polk Audio's PKSW10 fits into a 9.187" mounting hole.
It has a mounting depth of 4.250"
The mounting face is 10.250" in dia. with eight .225" elongated mounting screw holes.
Mounting screws are spaced at 9.750" on the diagonal center to center ( 8 holes at 45o spacing )
Remember, "SOUND WITHOUT QUALITY IS JUST NOISE"
Specifications
- Size / Type = 10" stiff treated paper cone woofer
- SPL = 91 db @ 1w/1m
- Wattage = 200 Watts RMS / 400 Watts Peak
- Stiif Thick Treated Paper cone woofer, foam surround
- Response = 30 Hz. to 8 kHz.
- Weight = Right a 6 pounds ea.
- Magnet = 64 oz. unshielded
- VC = 2" ( 50 mm)
- Ohms = 4 ohms
TS Measurements
- f(s) - 37 Hz.
- Q(ms) - 4.070
- V(as) - 34.71 liters ( 1.226 cf. )
- n(0) - 0.32%
- M(ms) - 112.60 grams
- R(e) - 0.36 Ohms
- Q(es) - 0.517
- SPL - 91 dB @ 1W/1m
- C(ms) - 0.16 mm/N
- Z(max) - 3.12 Ohms
- Q(ts) - 0.453
- L(e) - 0.11 mH
|
Please note that we have many other similar/related items from
this and other manufacturers up for auction.
Click here and check them out as well.
|
