Product Description:
Cerwin Vega 6 1/2 inch 2 Way Speaker Kit
Components to build one pair of speakers
New/Unused
|
This is a super kit, top quality components matched to give you a fantistic sound.
You get the components to build One pair of 6 1/2" two way speakers.
A great project for the seasoned pro, or beginner, build a couple .6 to .75 cf. cabinets and plug in the components for a nice little set of book shelf speakers.
Put together from matched Cerwin Vega components you will end up with a nice sounding small speaker system, nice little bedroom, office or dorm speakers. It's a great DIY project.
Components in the Kit
- (2) 6 1/2" Cerwin Vega 8 ohm Woofers
- (2) 1" Cerwin Vega Dome Tweeter (8 ohm)
- (2) Cerwin Vega Two Way Crossovers
Over All Specifications to expect
- Power 5 to 125 Watts RMS Per Channel at 8 ohms
- Impedance 8 ohms
- Frequency response 45 Hz. to 20 kHz.
- Efficiency 93 dB at 1 watt at 1 meter
Woofer Specifications
- 6.5" Polly Cone Woofer - size - 6.5" sq. frame, 5 7/8" mnt hole, 2 1/2" deep
- Impedance 8 ohms
- Weight 2.5 pounds each
- Revc - 7.032 ohms
- Fs - 55.58 Hz.
- Zmax - 66.593 ohms
- Qes - 0.7235
- Qms - 6.1282
- Qts - 0.6471
- Le - 0.3788 mH (at 1 kHz.)
- Vas - 6.4370
- BL - 0.1668 N/A
- Sensitivity - 93 dB
- Frequency response 55 Hz. to 7 kHz.
- Power - 125 Watts RMS in a cabinet
Tweeter Specifications
- 1" Dome Tweeter - size - 3 1/8" sq. frame, 2" mnt hole 4 screw holes on a 2 1/8" sq. grid center to center
- 8 ohms
- Power 40 watts
- Sensitivity - 93 dB
- Frequency response 2.0 kHz. to 20 kHz.
- Weight .5 pounds each
Misc. Information
- Cabinet requirements are pretty basic keep it about .6 to .75 cf. and you should be fine, ported if you want or sealed either will work.
- Wiring, the crossover to the speakers is very straight forward, The red leads are for the woofer, the blue leads for the tweeter, the solid leads are Positive, the lead with the stripe is negative.
- Shipping wt. is 8 pounds.
(Click on a Picture to Enlarge for Better Detail)
