 Redefining the Cost -vs- Performance Barrier
Introducing our Mavin
Uni-Z 4/8jp
A Totally New
Concept in Woofers
Balancing the Best in Power Handling
Performance and Sound Quality
All Packed into a 3, 4, 8 or 12 ohm 12 inch driver
Features - Up To 1400 watts peak - 92 db - 32 to 3500 Hz
160 oz. Magnet - 2" four layer vented voice coil
You Are Buying A PAIR for this price |
    
This pair of Mavin UNI-Z 4/8jp combine the best features into one Universal Home or Automotive Speaker
Unique to the world, the Uni-Z 48jp woofer offers you a speaker that can be used at Home, or one that is at Home in your Car. This standard 12" Woofer that can be used in either a 4 or 8 ohm system. The Mavin Uni-Z 4/8jp Combines Hot Look, Great Sound, Super Performance.
Modeled after the Cerwin Vega woofers of old with the Hot Looking Red Surrounds, the Uni-Z 4/8jp not only looks strikingly good, but sounds and performs even better.
A heavy hitter in both sound and weight the Mavin Uni-Z 4/8jp weights in at 7 kilos or over 15 pounds, with 160 ounces being the magnet, this makes for a high performance 92 db woofer. Power it with 10 watts or 1000 watts the Mavin Uni-Z 4/8jp is right at home. Unlike most after market speaker the Uni-Z 4/8jp also comes with our 1 year warranty, so buy with the confidence that you are purchasing a quality product.
Bottomline, "SOUND WITHOUT QUALITY IS JUST NOISE"
The General specifications of the Mavin UNI-Z 4/8jp are as follows.
Common Specifications are
- Size / Type = 12" Woofer or Sub Woofer
- SPL = 92 db @ 1w/1m
- Wattage = 350 Watts RMS / 700 Watts Peak
Running in 3 ohm mode, 700 watts RMS, and 1400 Watts Peak
- Gold Plated Binding Posts
- Foam Edge Treated paper Cone
- Response = 32 Hz. to 3.5 kHz.
- Weight = 7.03 kilos or 15.49 pounds
- Magnet = 2 x 80 oz. ( 160 oz. total)
- VC = 2" ( 50 mm) TSV ( 4 layer )
For the cabinet builders we are happy to include the following Theil Small Specifications.
8 ohm T/S specifications
- Impedance ( Z ) = 8 ohms nominal
- Revc = 5.08 ohms
- Fms = 33.90 hz.
- Zmax = 34.65 ohms
- Qes = 1.61
- Qms = 9.37
- Qys = 1.37
- Le = 0.88 mH ( at 1 kHz.)
- Vas = 150.03 L ( 5.2982 ft^3)
- Bl = 8.64 N/A
- Mms = 111.15 g
- Cms = 198.37 uM/N
- Kms = 5041.20 N/M
- Rms = 2.53 R Mechanical
4 ohm T/S specifications
- Impedance ( Z ) = 4 ohms nominal
- Revc = 3.07 ohms
- Fms = 33.89 hz.
- Zmax = 32.24 ohms
- Qes = 1.01
- Qms = 9.63
- Qys = 0.92
- Le = 0.81 mH ( at 1 kHz.)
- Vas = 150.88 L ( 5.3283 ft^3)
- Bl = 8.44 N/A
- Mms = 110.52 g
- Cms = 198.49 uM/N
- Kms = 5012.71 N/M
- Rms = 2.44 R Mechanical
|
Bottom Line, if you are looking for a Woofer as a replacement for one you've blown or a new woofer for that system you are building the Mavin UNI-Z 48jp is a great choice. You get the performance, the power handling and sound quality all at a price everyone can afford.
If you know me, you know I like a deal, why spend $300.00 when you can spend one third that amount, and get something that performs just as well. With the UNI-Z I believe I've gone one better, the Mavin Uni-Z series not only looks good but it performs too.
With the UNI-Z Balance is Acheved
Breaking The Cost -vs- Performance Barrier
The Result - You Win!
Note this is a very heavy speaker and will require the use of at least #12 screws and a 3/4" or greater cabinet front to secure correctly. T Nuts may be required if the speaker is mounted vertically. The speaker can pull free, it is that heavy, if your cabinet is particle board or MDF, I would use T-Nuts to prevent damage to your cabinets....
|
|
